I have a requirement where I need to pull down the GPIO for 5 milliseconds. The GPIO is connected to a chip reset pin. As per the requirement I need to reset the chip. To reset the chip we need to give 5 milliseconds low pulse on the reset pin. There is no driver for the chip. Can anyone guide me anywhere in the kernel source where a similar kind of requirement requirement was implemented or any inputs we can add this gpio number parsing from dts and delay to generate low pulse.
Related Questions in LINUX-KERNEL
- Android kernel error: undefined reference to `get_hw_version_platform'
- Is there a need for BPF Linux namespace?
- Facing fatal errors while running "yum update" command on CentOS 7/Cloudlinux 7
- crash utility itself crashes while decoding kdump generated from null pointer dereference in kernel module
- How to compile the Linux kernel with -O0 for more detailed debug?
- Linux support for parallel Pixel data Image sensor
- Can't upgrade to newest version of linux-image-6.5.0-26-generic
- How to protect a page so that it cannot be write in mips arch?
- How to extract the .img file into normal kernel source file in the linux?
- Storage size of struct hash_desc desc; isn't known
- How can I intercept failed file openning calls?
- struct nameidata-Linux Kernel Module
- How to modify a 'struct msghdr' in Linux Kernel Module?
- How to allocate 500MB+ physically contiguous memory in a Linux kernel module and copy data to that memory from a userspace process?
- Hyper Threading: nosmt in grub configuration
Related Questions in LINUX-DEVICE-DRIVER
- Linux support for parallel Pixel data Image sensor
- Linux to QNX USB driver convert
- IRQ interrupt obtaining abnormal possibilities
- Error compiling dts (Device Tree source) file for dtb
- How to write the external interrupt callback function of Linux kernel v3.10?
- Does traffic control (tc) command have a rate limit?
- The module first installed the alarm when it started
- How does the Linux kernel now what to put in platform_data?
- How to reduce cached memory used by Linux kernel on embedded linux platform
- Notifying Linux MMC subsystem about power loss
- Linux kernel 6.6 from block_device how to find out if it has mounted file system
- Linux SPI read and write may occasionally be slow?
- gettimeofday calculates the runtime, with occasional significant deviations?
- uImage is not supported in kexec_file
- Linux of_platform_depopulate() does not remove drivers
Related Questions in EMBEDDED-LINUX
- Touch calibration error when using Avalonia UI with Raspberry PI 4 (lite) DRM Mode
- Can't ping to 8.8.8.8 and google.com in beaglebone black
- How to extract the .img file into normal kernel source file in the linux?
- Using C++ libgpiod to calculate interval and speed between events
- yocto bitbake 'python3 setup.py bdist_wheel ' execution failed
- How to reduce cached memory used by Linux kernel on embedded linux platform
- Unable to parse input tree, possibly due to dash
- How to add a button handler to GPIO pin through a push button
- Linux of_platform_depopulate() does not remove drivers
- Filling a sk_buff with content of recieved frame
- How to reduce reserved memory allocated by Linux kernel during boot time
- embedded linux buildroot how to work with axi-gpio?
- How do I know when the dsa_loop and dsa_loop_bdinfo linux kernel modules are working?
- buildroot for zedboard, how to enable axi-gpio in device tree?
- Driver is not loading when there 2 or more source files
Related Questions in GPIO
- Accessing GPIO via MMIO in Android App on Raspberry Pi 4
- Unable to read value from gpio set as input
- Turning on an LED using Assembly on raspbianOS (Raspberry Pi 3 Model B)
- Driving Fintek F75113 GPIO
- IRQ interrupt obtaining abnormal possibilities
- Error compiling dts (Device Tree source) file for dtb
- asyncio only running first gpiozero coroutine
- Rf module getting signals when i use ssh, but not when i send it from the transmitter
- VLC - python and GPIO - random fonction
- Use raspberry pi 4 GPIO with node js
- How to add a button handler to GPIO pin through a push button
- Can't access GPIO on Python from Docker container on Raspberry Pi 5
- Are FPGA GPIOs capable enough to read bits at a high rate (26Mbps)? If not, what is a possible way?
- Terminal errors when running my project code, which uses GPIO
- How to set up GPIO event listeners on a Raspberry Pi using Rust
Related Questions in DEVICE-TREE
- Error compiling dts (Device Tree source) file for dtb
- How does the Linux kernel now what to put in platform_data?
- Unable to parse input tree, possibly due to dash
- embedded linux buildroot how to work with axi-gpio?
- buildroot for zedboard, how to enable axi-gpio in device tree?
- without id_table, of_match_table can't match device tree node.And with id_table, of_match_table can. Why?
- Invalid Handle error when trying to NtQueryObject from midi device
- IMX6ULL: [ 75.326643] watchdog: watchdog0: watchdog did not stop! on Linux 6.1.1
- device tree devices binding order with the device drivers
- Zephyr DT_PHA_BY_NAME API returns error that the macro does not exist in devicetree_generated.h
- GPIOd not detecting rising edge but SYSFS implementation did
- Can nodes in .dts files be set to never be overridden?
- Generic MDIO device tree node to access switch registers
- Using GPIO pin for reset
- [ASOC][tlv320aic3110] Error resetting registers and error 16 (device or resource busy)
Popular Questions
- How do I undo the most recent local commits in Git?
- How can I remove a specific item from an array in JavaScript?
- How do I delete a Git branch locally and remotely?
- Find all files containing a specific text (string) on Linux?
- How do I revert a Git repository to a previous commit?
- How do I create an HTML button that acts like a link?
- How do I check out a remote Git branch?
- How do I force "git pull" to overwrite local files?
- How do I list all files of a directory?
- How to check whether a string contains a substring in JavaScript?
- How do I redirect to another webpage?
- How can I iterate over rows in a Pandas DataFrame?
- How do I convert a String to an int in Java?
- Does Python have a string 'contains' substring method?
- How do I check if a string contains a specific word?
Popular Tags
Trending Questions
- UIImageView Frame Doesn't Reflect Constraints
- Is it possible to use adb commands to click on a view by finding its ID?
- How to create a new web character symbol recognizable by html/javascript?
- Why isn't my CSS3 animation smooth in Google Chrome (but very smooth on other browsers)?
- Heap Gives Page Fault
- Connect ffmpeg to Visual Studio 2008
- Both Object- and ValueAnimator jumps when Duration is set above API LvL 24
- How to avoid default initialization of objects in std::vector?
- second argument of the command line arguments in a format other than char** argv or char* argv[]
- How to improve efficiency of algorithm which generates next lexicographic permutation?
- Navigating to the another actvity app getting crash in android
- How to read the particular message format in android and store in sqlite database?
- Resetting inventory status after order is cancelled
- Efficiently compute powers of X in SSE/AVX
- Insert into an external database using ajax and php : POST 500 (Internal Server Error)