Hello I have configured SSL and MAMP finally I succeeded, but now I need to hold a controller server that is in wsgi, I configured the WSGIScriptAlias but the URL is not looking where I access. In the browser I can see the json to configure it to look for defects in the following url: http: // localhost / cgi-bin
I require to see it in: http: //localhost/cgi-bin/controller.wsgi
Attached code in httpd.conf,httpd-ssl.conf and httpd-vhosts.conf
ServerRoot "/Applications/MAMP/Library"
<IfModule !mpm_netware.c>
PidFile logs/httpd.pid
</IfModule>
Listen 80
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule bucketeer_module modules/mod_bucketeer.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule echo_module modules/mod_echo.so
LoadModule case_filter_module modules/mod_case_filter.so
LoadModule case_filter_in_module modules/mod_case_filter_in.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule fastcgi_module modules/mod_fastcgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule perl_module modules/mod_perl.so
LoadModule wsgi_module modules/mod_wsgi.so
LoadModule xsendfile_module modules/mod_xsendfile.so
LoadModule php5_module /Applications/MAMP/bin/php/php5.6.7/modules/libphp5.so
#
AddType application/x-httpd-php .php .phtml
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
User usuario
Group #-1
</IfModule>
</IfModule>
<IfModule xsendfile_module>
XSendFile on
</IfModule>
ServerAdmin [email protected]
ServerName localhost:80
DocumentRoot "/Users/usuario/Sites/usuariocloud/client"
<Directory />
Options Indexes FollowSymLinks
AllowOverride None
</Directory>
<Directory "/Users/usuario/Sites/usuariocloud/client">
Options All
AllowOverride All
Order allow,deny
Allow from all
XSendFilePath "/Applications/MAMP/htdocs"
</Directory>
<IfModule dir_module>
DirectoryIndex index.html index.php
<IfModule perl_module>
DirectoryIndex index.pl
</IfModule>
<IfModule wsgi_module>
DirectoryIndex index.wsgi index.py
</IfModule>
</IfModule>
AccessFileName .htaccess
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
<Files ~ "^\.DS_Store">
Order allow,deny
Deny from all
</Files>
ErrorLog "/Applications/MAMP/logs/apache_error.log"
LogLevel error
<IfModule log_config_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
</IfModule>
<IfModule alias_module>
Alias /favicon.ico "/Applications/MAMP/bin/favicon.ico"
Alias /icons/ "/Applications/MAMP/Library/icons/"
<Directory "/Applications/MAMP/Library/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Alias /phpMyAdmin "/Applications/MAMP/bin/phpMyAdmin"
Alias /phpmyadmin "/Applications/MAMP/bin/phpMyAdmin"
<Directory "/Applications/MAMP/bin/phpMyAdmin">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Alias /phpPgAdmin "/Applications/MAMP/bin/phpPgAdmin"
Alias /phppgadmin "/Applications/MAMP/bin/phpPgAdmin"
<Directory "/Applications/MAMP/bin/phpPgAdmin">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Alias /phpLiteAdmin "/Applications/MAMP/bin/phpLiteAdmin"
Alias /phpliteadmin "/Applications/MAMP/bin/phpLiteAdmin"
<Directory "/Applications/MAMP/bin/phpLiteAdmin">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Alias /SQLiteManager "/Applications/MAMP/bin/SQLiteManager"
Alias /sqlitemanager "/Applications/MAMP/bin/SQLiteManager"
<Directory "/Applications/MAMP/bin/SQLiteManager">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Alias /MAMP "/Applications/MAMP/bin/mamp"
<Directory "/Applications/MAMP/bin/mamp">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "/Applications/MAMP/cgi-bin/"
Alias /perl/ "/Applications/MAMP/cgi-bin/"
<IfModule perl_module>
PerlModule ModPerl::Registry
<Location /perl>
SetHandler perl-script
PerlResponseHandler ModPerl::Registry
PerlOptions +ParseHeaders
Options +ExecCGI
</Location>
</IfModule>
</IfModule>
<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock
</IfModule>
<Directory "/Applications/MAMP/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
WSGIScriptAlias /cgi-bin "/User/usuario/Sites/usuariocloud/server/"
<Directory "/User/usuario/Sites/usuariocloud/server/">
AllowOverride None
Options Indexes FollowSymLinks Includes ExecGCI
Order allow,deny
Allow from all
</Directory>
DefaultType text/plain
<IfModule mime_module>
TypesConfig /Applications/MAMP/conf/apache/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddHandler cgi-script .cgi .pl
</IfModule>
<IfModule mime_magic_module>
MIMEMagicFile /Applications/MAMP/conf/apache/magic
</IfModule>
# Server-pool management (MPM specific)
#Include /Applications/MAMP/conf/apache/extra/httpd-mpm.conf
# Multi-language error messages
#Include /Applications/MAMP/conf/apache/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include /Applications/MAMP/conf/apache/extra/httpd-autoindex.conf
# Language settings
#Include /Applications/MAMP/conf/apache/extra/httpd-languages.conf
# User home directories
#Include /Applications/MAMP/conf/apache/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include /Applications/MAMP/conf/apache/extra/httpd-info.conf
# Virtual hosts
Include /Applications/MAMP/conf/apache/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include /Applications/MAMP/conf/apache/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include /Applications/MAMP/conf/apache/extra/httpd-dav.conf
# Various default settings
#Include /Applications/MAMP/conf/apache/extra/httpd-default.conf
# Secure (SSL/TLS) connections
Include /Applications/MAMP/conf/apache/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup file:/dev/urandom 1024
SSLRandomSeed connect file:/dev/urandom 1024
#
# Uncomment the next line if Apache should not accept SSLv3 connections, to learn more google for "POODLE SSLv3".
# SSLProtocol All -SSLv2 -SSLv3
</IfModule>
httpd-ssl.conf
#
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
#
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512
#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
Listen 443
##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##
#
# Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache "dbm:/Applications/MAMP/Library/logs/ssl_scache"
SSLSessionCache "shmcb:/Applications/MAMP/Library/logs/ssl_scache(512000)"
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual exclusion semaphore the
# SSL engine uses internally for inter-process synchronization.
SSLMutex "file:/Applications/MAMP/Library/logs/ssl_mutex"
##
## SSL Virtual Host Context
##
<VirtualHost _default_:443>
# General setup for the virtual host
DocumentRoot "/Users/usuario/Sites/usuariocloud/client"
ServerName localhost:443
ServerAdmin [email protected]
ErrorLog "/Applications/MAMP/Library/logs/error_log"
TransferLog "/Applications/MAMP/Library/logs/access_log"
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
# Uncomment the next line if Apache should not accept SSLv3 connections, to learn more google for "POODLE SSLv3".
# SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:-SSLv3:+EXP:+eNULL
# Comment the next line (and uncomment the line above) if Apache should not accept SSLv3 connections, to learn more google for "POODLE SSLv3".
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
SSLCertificateFile "/Applications/MAMP/conf/apache/extra/ssl/privateserver.crt"
#SSLCertificateFile "/Applications/MAMP/conf/apache/server-dsa.crt"
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile "/Applications/MAMP/conf/apache/extra/ssl/privateserver.key"
#SSLCertificateKeyFile "/Applications/MAMP/conf/apache/server-dsa.key"
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile "/Applications/MAMP/conf/apache/server-ca.crt"
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "/Applications/MAMP/conf/apache/ssl.crt"
#SSLCACertificateFile "/Applications/MAMP/conf/apache/ssl.crt/ca-bundle.crt"
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "/Applications/MAMP/conf/apache/ssl.crl"
#SSLCARevocationFile "/Applications/MAMP/conf/apache/ssl.crl/ca-bundle.crl"
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/Applications/MAMP/Library/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog "/Applications/MAMP/Library/logs/ssl_request_log" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
httpd-vhosts.conf
#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
# Use name-based virtual hosting.
#
NameVirtualHost *:80
#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot "/Applications/MAMP/Library/docs/dummy-host.example.com"
ServerName dummy-host.example.com
ServerAlias www.dummy-host.example.com
ErrorLog "logs/dummy-host.example.com-error_log"
CustomLog "logs/dummy-host.example.com-access_log" common
<Directory "/User/usuario/Sites/usuariocloud/client">
Order allow,deny
Allow from all
</Directory>
WSGIScriptAlias /cgi-bin "/User/usuario/Sites/usuariocloud/server/"
<Directory "/User/usuario/Sites/usuariocloud/server/">
AllowOverride None
Options Indexes FollowSymLinks Includes ExecGCI
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot "/Applications/MAMP/Library/docs/dummy-host2.example.com"
ServerName dummy-host2.example.com
ErrorLog "logs/dummy-host2.example.com-error_log"
CustomLog "logs/dummy-host2.example.com-access_log" common
</VirtualHost>
and the controller.wsgi
#! /usr/bin/python
# Library Imports
import json, cgi, sys, os
path = os.path.dirname(__file__)
if path not in sys.path:
sys.path.append(path)
# Own Libraries
from petition_solver.solver import Solver
def application(env, resp):
response = { "response": "fail",
"error" : """Expecting ?Json=
{
"function":"functionName",
"entity":"entityName",
"params":
{
"param1":"value1",
"param2":"value2",
"paramn":"value n"
}
}""".replace('\r', ' ').replace('\n', ' ').replace('\t', '')
}
# Read Params
form = cgi.FieldStorage(fp=env['wsgi.input'], environ=env)
if form:
userAgent = env["HTTP_USER_AGENT"] if "HTTP_USER_AGENT" in env else ""
param_json = form['json'].value
petition = json.loads(param_json)
if('file' in form and "params" in petition):
param_file = form['file']
if(isinstance(param_file, list)):
petition['params']['files'] = []
for f in param_file:
filename = unicode(f.filename, 'utf-8')
petition['params']['files'].append({"originalName" : filename, "file" : f.file.read()})
else:
petition['params']['file'] = param_file.file.read()
filename = unicode(param_file.filename, 'utf-8')
petition['params']['originalName'] = filename
solver = Solver()
response = solver.solvePetition(petition, userAgent=userAgent)
if (response and "download" in response and response["download"]):
detail = response["file"]["storage"]
mime = detail["mime"].decode('utf-8')
name = detail["originalName"].encode("ascii", 'replace')
data = detail["file"]
resp('200 OK',[('Content-type', '{0}'.format(mime)),('Content-disposition', 'attachment; filename*=UTF-8''{0}; filename={0}'.format(name))])
yield data
else:
resp('200 OK',[('Content-type', 'text/html;charset=utf-8')])
yield json.dumps(response)
I don't understand my error
You just add the following before the WSGI definition
is all ;)