I have a CISCO device. The device is configured with the WebUI. Which have many details? But I am not able to get these following details from there.
- CPU Load
- Temperature
- Device details.
- Memory use
- Alarms
I have tried many times to get those above define values. But not able to get any things, Please help.
Depending on the model & software version, the web UI can vary. You'll have better luck obtaining those details utilising CLI instead.
Whilst the CLI is fairly consistent between models/software versions, some commands might not be available. Consulting the Cisco documentation for your specific hardware & software revisions should help.
show processes cpu historyWill show you the CPU usage over 60 seconds, 1 hour and 72 hours.
show processes cpuWill show you the running processes with the CPU utilisation over 5 seconds, 1 minute and 5 minutes.
show environment allshow environment temperatureOutputs all the environmental conditions including power & temperature. You'll find the temperatures within the temperature section .
show versionDisplays the core information about your device & software. This includes the hardware details, IOS & ROM software versions, interfaces & memory, and system uptime/previous reload reason.
show inventoryWill output details about any additional hardware installed into your device, such as SFP, their type & serial numbers.
show processes memoryWhilst
show versionshows you the total memory installed into your device,show processes memoryshows you how it's being utilised, by which process, and how much is remaining.show flash:/show bootflashWill show you the files being stored into the flash memory, their sizes & how much space is left.
show alarms/show facility-alarm statusIf your equipment has an alarm indicator, the above commands will show advise you what's alarmed & the reasoning.