at first: I'm not a BLE expert so I try to describe my problem as good as I can and I apologize in advance if I don't use the right terms or definitions.
- I've bought a BLE-Energy-Harvesting button of type PTM 215B (1).
- I've installed node-red on Raspberry-Pi 2b (2)
- Locally on node-red the package node-red-contrib-generic-ble was install with npm (3)
when node-red is started I can see the elements of generic-ble-package and so I tried to configure the "Generic Ble In"-Item.
When I scan for devices, I have to push and release the button several times till it is shown in the list - that's no wonder because without these actions the button has no energy. But then it gets complicated. When I click on "Apply", the item tries to get the GATT(ributes) from the button.The problem is - as far as I understood - the button doesn't have any.
From the CLI I've used bluetoothctl to scan for devices and I've seen that the button is always recognized by the system (on-button-pressed and on-button-released).
I've also tried with different other node-red packaged but they had even more problems ( e.g. noble (4) could not be installed properly and it looks like abandoned )
I assume the problem is sitting in front of the screen but this is the second Saturday I'm trying to "install a button" and I really don't know how to proceed.
I've read (somewhere) that one of the strength of BLE is the possible usage of energy-harvesting -sensors. But does the "general-ble"-package do the job?
-If yes, how? -If no, which package should I use?
I'd really like to use a node-red-package because I want to expand an already existing flow.
I appreciate any help and/or link.
Thank you in advance.
Regards,
Mr P
Additional info:
- Raspbian: VERSION="10 (buster)"
- npm --version: 6.14.8
- node-red: 1.2.6: Maintenance Release
Ref.
I found the way to do the job:
I installed the ble-beacon-scanner (1) and that works fine for my purpose.
As I understood: Beacons use ble-notifications, which don't share attributes and don't need a continuous connectivity.
The generic library unfortunately doesn't offer this part of the ble-protocol.
Thank you all.
Regards,
Mr P
(1) https://flows.nodered.org/node/node-red-contrib-blebeacon-scanner