Following my previous question How to show an entity from in the Wirecloud MapViewer widget , I installed rush, and when I intend to start the contextBroker from the folder /etc/sysconfig I get the following results:
[root@fiware sysconfig]# contextBroker -rush localhost:1234 -https -key /etc/sysconfig/localhost.key -cert /etc/sysconfig/localhost.pem
E@19:00:10 exitFunc[1009]: unlink(/tmp/contextBroker.pid): No such file or directory
[root@fiware sysconfig]# F@19:00:10 ***[1063]: Connected to mongo at localhost:orion
E@19:00:10 restStart[764]: MHD_start_daemon failed
restStart: error 3
E@19:00:10 orionExit[998]: restStart: error
Although I get "MHD_start_daemon failed" when I check if the rush and the contextBroker are running, with the "netstat -tupln" command, I get the following result :
[root@fiware /]# netstat -tupln
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:5001 0.0.0.0:* LISTEN 28973/node
tcp 0 0 0.0.0.0:27017 0.0.0.0:* LISTEN 1622/mongod
tcp 0 0 0.0.0.0:6379 0.0.0.0:* LISTEN 28942/./home/locala
tcp 0 0 0.0.0.0:5901 0.0.0.0:* LISTEN 1673/Xvnc
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1234/rpcbind
tcp 0 0 0.0.0.0:6001 0.0.0.0:* LISTEN 1673/Xvnc
tcp 0 0 0.0.0.0:28017 0.0.0.0:* LISTEN 1622/mongod
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 12809/sshd
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 1372/cupsd
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1576/master
tcp 0 0 0.0.0.0:54363 0.0.0.0:* LISTEN 1252/rpc.statd
tcp 0 0 0.0.0.0:1026 0.0.0.0:* LISTEN 20892/contextBroker
tcp 0 0 :::6379 :::* LISTEN 28942/./home/locala
tcp 0 0 :::111 :::* LISTEN 1234/rpcbind
tcp 0 0 :::6001 :::* LISTEN 1673/Xvnc
tcp 0 0 :::22 :::* LISTEN 12809/sshd
tcp 0 0 ::1:631 :::* LISTEN 1372/cupsd
tcp 0 0 ::1:25 :::* LISTEN 1576/master
tcp 0 0 :::42975 :::* LISTEN 1252/rpc.statd
tcp 0 0 :::1026 :::* LISTEN 20892/contextBroker
udp 0 0 0.0.0.0:36688 0.0.0.0:* 1252/rpc.statd
udp 0 0 0.0.0.0:985 0.0.0.0:* 1234/rpcbind
udp 0 0 0.0.0.0:5353 0.0.0.0:* 1361/avahi-daemon
udp 0 0 0.0.0.0:1004 0.0.0.0:* 1252/rpc.statd
udp 0 0 0.0.0.0:111 0.0.0.0:* 1234/rpcbind
udp 0 0 0.0.0.0:631 0.0.0.0:* 1372/cupsd
udp 0 0 0.0.0.0:51640 0.0.0.0:* 1361/avahi-daemon
udp 0 0 0.0.0.0:68 0.0.0.0:* 1131/dhclient
udp 0 0 :::985 :::* 1234/rpcbind
udp 0 0 :::111 :::* 1234/rpcbind
udp 0 0 :::39336 :::* 1252/rpc.statd
And then I return to "https://mashup.lab.fi-ware.org" and I put the following input on each widget/operator:
NGSI Source
NGSI server URL: thiisorioncontextbroker:1026/ (with http no https)
NGSI proxy URL: https://ngsiproxy.lab.fi-ware.org/
NGSI entities: City
NGSI Attributes: position
NGSI Entity to Poi
Coordinates attribute: position
But nothing shows up in the map again :( .
After have runned the following command I got an ssl error:
[root@fiware sysconfig]# curl -k https://localhost:1026/version
curl: (35) SSL connect error
----------------------------------------------------------------------------------
I killed the contextBroker running process and start again, and then I runned the following command again:
[root@fiware sysconfig]# curl -k https://localhost:1026/version
<orion>
<version>0.14.0</version>
<uptime>0 d, 0 h, 15 m, 18 s</uptime>
<git_hash>5e3d210e4b15fa9ebbfa07c93dd41f8b41697d0e</git_hash>
<compile_time>nodate</compile_time>
<compiled_by>fermin</compiled_by>
<compiled_in>centollo</compiled_in>
</orion>
The contextBroker url with https protocol (https://YYY.YYY.YYY.YYY:1026) works perfectly with NGSIUpdater widget. So I'm also using in the wirecloud widget/operator https://YYY.YYY.YYY.YYY:1026 instead of http://YYY.YYY.YYY.YYY:1026, but I still don't get the marks (PoI) to be shown in the MapViewer.
Running netstat -tupln again show me the following results:
tcp 0 0 0.0.0.0:27017 0.0.0.0:* LISTEN 1622/mongod
tcp 0 0 0.0.0.0:6379 0.0.0.0:* LISTEN 28942/./home/locala
tcp 0 0 0.0.0.0:5901 0.0.0.0:* LISTEN 1673/Xvnc
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1234/rpcbind
tcp 0 0 0.0.0.0:6001 0.0.0.0:* LISTEN 1673/Xvnc
tcp 0 0 0.0.0.0:28017 0.0.0.0:* LISTEN 1622/mongod
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 12809/sshd
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 1372/cupsd
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1576/master
tcp 0 0 0.0.0.0:54363 0.0.0.0:* LISTEN 1252/rpc.statd
tcp 0 0 0.0.0.0:1026 0.0.0.0:* LISTEN 26631/contextBroker
tcp 0 0 :::6379 :::* LISTEN 28942/./home/locala
tcp 0 0 :::111 :::* LISTEN 1234/rpcbind
tcp 0 0 :::6001 :::* LISTEN 1673/Xvnc
tcp 0 0 :::22 :::* LISTEN 12809/sshd
tcp 0 0 ::1:631 :::* LISTEN 1372/cupsd
tcp 0 0 ::1:25 :::* LISTEN 1576/master
tcp 0 0 :::42975 :::* LISTEN 1252/rpc.statd
tcp 0 0 :::1026 :::* LISTEN 26631/contextBroker
udp 0 0 0.0.0.0:36688 0.0.0.0:* 1252/rpc.statd
udp 0 0 0.0.0.0:985 0.0.0.0:* 1234/rpcbind
udp 0 0 0.0.0.0:5353 0.0.0.0:* 1361/avahi-daemon
udp 0 0 0.0.0.0:1004 0.0.0.0:* 1252/rpc.statd
udp 0 0 0.0.0.0:111 0.0.0.0:* 1234/rpcbind
udp 0 0 0.0.0.0:631 0.0.0.0:* 1372/cupsd
udp 0 0 0.0.0.0:54968 0.0.0.0:* 26706/local
udp 0 0 0.0.0.0:51640 0.0.0.0:* 1361/avahi-daemon
udp 0 0 0.0.0.0:68 0.0.0.0:* 1131/dhclient
udp 0 0 :::985 :::* 1234/rpcbind
udp 0 0 :::111 :::* 1234/rpcbind
udp 0 0 :::39336 :::* 1252/rpc.statd
Thanks for all the great support from fiware people.
Taking into account question comments, the problem of setting Orion CB with HTTPS seems to be solved when using the https://github.com/telefonicaid/fiware-orion/blob/master/scripts/httpsPrepare.sh script to generate the key and cert files.
In addition, you need to have Rush up and running (you use
-rush localhost:1234to start Orion, but I don't see any process listening to 1234, so I understand Rush is not up). As far as I understand, this is being discussed in this other question.